Gasket Kits
Please click on the images to enlarge
PLEASE CLICK HERE TO VIEW OUR GASKET KIT CATALOGUE

A full range of the older types of Delivery Valves, Elements and Nozzles are kept in stock.

Bosch, CAV, Caterpillar, Bryce, Deutz, Diesel-Kiki (Zexel), Fiat, Friedmann & Maier, Man, Nippon Denso, Ruston & Hornsby and Simms.
CAV/SIMMS Fibre Drive Coupling Disc Perkins, Ford, BMC and others
(CAV Part No: 7021-6).
8 Star Rubber Drive CR10 Coupling Disc 17mm thick
(SIMMS Part No: 82421).
8 Star Rubber Drive CR103 Coupling Disc 22mm thick
(SIMMS Part No: 87209).
Diesel Fuel Sedimentor (Pre-Filters)
CAV Part No. 5836B120 - Feed holes tapped out: 1/2" x 20tpi UNF.
CAV Part No. 5836B040 - Feed holes tapped out: 14mm x 1.5mm
Overall Length: 160mm
A very useful water-trap, the pre-filter has no gauze or paper filter to service and contaminants are collected and drained without dismantling.
It is available with a glass or aluminium bowl.
CAV/Lucas Glass Bowl "Square Shape"
(Part No: 7111-403).
CAV/Lucas Glass Bowl "Domed Shape"
(Part No: 7111-429).
Bosch Domed Glass Bowl - Small Hole
(Part No: 1 450 522 000)
Bosch Glass Pre-Filter, fits on Fuel Lift Pumps
(Part No: 1 457 434 009).
Sets of Injectors for Massey Ferguson FE 20C Tractor
CAV Type BKB50S622, Nozzle Type BDN4S1; set to 120 atms.
Fully refurbished with new nozzles, back leak-off bolts and all necessary copper sealing washers. Supplied as Service Exchange or No Old Units.
Coil of useful Sealing Wire for Fuel Pumps and other sealing jobs.
3/8" diameter Lead Seals 5606-62.
Lister Injector Nozzles - CS & JP Engines:
Nozzle Type: single Hole CAV BDL30S46, 0.3 dia. Hole,
Spray Angle 30 degrees. For CS Engine: 6/1 8/1 12/2.
Setting Pressure: 90 ats.

Nozzle Type: single Hole CAV BDL30S54, 0.32 dia. Hole,
Spray Angle 30 degrees. For JP Engine. Setting Pressure: 150 ats.

All of the nozzles are supplied with a Copper Sealing Washer.
Yanmar Fuel Injection Pumps
A non-genuine replacement service is now available
Yanmar Part Number 714250-51710. L40 Engine.
Yanmar Part Number 714350-51710. L60 Engine.
Yanmar Part Number 714870-51740. L70 Engine.
Yanmar Part Number 714970-51101. L100 Engine.
These units are new. No old units are required.
The Tappet is included with the unit.
A reconditioning service is not available on these units.
Thermostat Starting Aid
The Thermostat Starting Aid is designed to enhance starting in all weather conditions and is standard equipment on many diesel engines.
Perkins Engine Applications: Part No 2666103
CAV Part No 1854050. Screwed Terminal, 12 Volt.
Perkins Engine Applications: Part No 2666108
CAV Part No 1854102. Spade Push-on Terminal, 12 Volt.
We have Thermostarts, 24volt & 9 volt, for other engine applications in stock.
Sets of Injectors for Massey Ferguson Tractor 23C
CAV Type: BKB40S697. Nozzle Type: BDN12SPC6290. Set to 135 ats.
Des No 5354105
Fully refurbished, with new nozzle fitted and Copper Sealing Washer.
Supplied as Service Exchange or No Old Units.
Injector Unit for Lister CS & JP Engines
CAV Holder Type BKB50S507B. Nozzle BDL30S46. Set at 90 ats.
For Engine Types: CS 6/1, 8/1.
CAV Holder Type BKB50S507B. Nozzle BDL30S54. Set at 150 ats.
For Engine Types: JP2/3/4/6.
Fully refurbished, with new nozzle fitted and Copper Sealing Washer.
Supplied as Service Exchange or No Old Units.
Lister SR Injector Unit
Lister Part No: 201-50441, CAV/Bryce Identification No: 99/274
Body Part No: NSDLB086D0490 or BKBL86S5194B
Body Sealing O-ring, Lister Part No: 201-11080
Nozzle, Lister Part No: 201-50461
Nozzle Seating Washer, Lister Part No: 201-11720
Nozzle, CAV/Bryce Part No: HL140S25C544 or BDLL140S6439
Set @ 2940psi, 200bar, 200atms.
Lister ST Injector Unit
Lister Part No: 201-80265, CAV/Bryce Identification No: 99/355 & 99/430
Body Part No: NSDLB080D490
Body Sealing O-ring, Lister Part No: 201-11080
Original Nozzle, Lister Part No: 201-81391, Bryce Part No: HL134S25D656P2
Current Nozzle, Lister Part No: 201-81393, Bryce Part No: HL140S25D693P2
Nozzle Seating Washer, CAV Part No: 29004
Set @ 2940psi, 200bar, 200atms.
Diesel Fuel Filter for Lister/Petter Engines
Threaded: 1/4 BSP Thread. Flow Right to Left
Overall Ht: 4 inches.
Lister/Petter No: P28439.
Crosland No: 18489.
Injector Clamp for Perkins 4/108
Injector Fixing Clamp, Part No: 7008-841.
Suitable for Perkins 4/108 injectors.
Fitted on CAV Injector Type BKB40SD5224, 5352102
Perkins Engine Code "BG"
Note: Ensure that the countersink on the flange is always upwards on the injector body when fitting.
Testing a Lister FR CAV Fuel Pump
The 1956 Leslie Hartridge model UE/6 Fuel Pump Test Bench is still in use in our workshop for testing a range of the 'older types' of fuel pump.
Seen here testing a CAV BPF Type Lister FR Fuel Pump.
It is nice to see the original cam-box supplied with the test bench still providing a good service.
Please Note: In all cases, proprietary part numbers are quoted for reference purposes only, and are not intended to imply that the parts are manufactured by the companies indicated.
 Gasket Kits
Links Page
web design & hosting by kyanite consulting limited
FreeIndex - Business Directory UK
HOME INJECTION
PUMPS INJECTORS
& NOZZLES LIFT PUMPS GOVERNORS GASKET KITS FUEL PUMP
TEST PLANS ITEMS
FOR SALE PRODUCT
SEARCH CONTACT US