A full range of the older types of Delivery Valves, Elements and Nozzles are kept in stock.

Bosch, CAV, Caterpillar, Bryce, Deutz, Diesel-Kiki (Zexel), Fiat, Friedmann & Maier, Man, Nippon Denso, Ruston & Hornsby and Simms.

Fuel Pump Drive Coupling Coupling Part No: SIMMS CR103 "B" size Camshaft Taper. A drive coupling with a rubber insert, used on the SIMMS type of fuel injection pump. Mainly on BMC & Ford applications. Separate parts are held in stock for these Couplings - the Rubber "Star" insert and the flanges.
CAV/SIMMS Fibre Drive Coupling Disc Perkins, Ford, BMC and others (CAV Part No: 7021-6).
8 Star Rubber Drive CR10 Coupling Disc 17mm thick (SIMMS Part No: 82421).
8 Star Rubber Drive CR103 Coupling Disc 22mm thick (SIMMS Part No: 87209).
SIMMS Excess Fuel Device for SPE 4A/6A Fuel Pumps, for Ford Fuel Pumps only (Part No: EFA14).
SIMMS Excess Fuel Device for SPE 4A/6A Fuel Pumps for BMC Fuel Pumps Only (Part No: EFA16).
Small Pre-Filter Sedimentor AC Delco Type 12mm or 1/2" UNF Left or Right Hand Flow, with conections.
Diesel Fuel Sedimentor (Pre-Filters) CAV Part No. 5836B120 - Feed holes tapped out: 1/2" x 20tpi UNF. CAV Part No. 5836B040 - Feed holes tapped out: 14mm x 1.5mm Overall Length: 160mm A very useful water-trap, the pre-filter has no gauze or paper filter to service and contaminants are collected and drained without dismantling. It is available with a glass or aluminium bowl.
CAV/Lucas Glass Bowl "Square Shape" (Part No: 7111-403).
CAV/Lucas Glass Bowl "Domed Shape" (Part No: 7111-429).
Bosch Domed Glass Bowl - Small Hole (Part No: 1 450 522 000)
Bosch Glass Pre-Filter, fits on Fuel Lift Pumps (Part No: 1 457 434 009).
Lift Pump Kits for Bosch FP/K22 type, comprising all necessary O-rings, Gaskets, Copper Washers and Hand Primer.
Service Kit for AMAL Type Lift Pumps: A complete kit to enable you to service your AMAL Fuel Lift Pump. Comprising: Diaphragms, Seat & Valve Disc and necessary Sealing Washers. The most common application of the AMAL Fuel Lift Pump is on the Gardner Engines. Other Spares and Service Exchange units are available for this type of Lift Pump.
CAV DPA Mechanical Governor Pump Gasket Kit. For the Fuel Pump type illustrated 3/4/6 cylinder, comprising all necessary O-rings, Gaskets, Copper Washers and Rotor Blades.
CAV DPA Hydraulic Governor Pump Gasket Kit. For the Fuel Pump type illustrated 3/4/6 cylinder, comprising all necessary O-rings, Gaskets, Copper Washers and Rotor Blades.
SIMMS Minimec Fuel Pump Gasket Kits, 4/6 cylinder, comprising all necessary O-rings, Gaskets, Copper Washers, Seals, Caps etc.
Fordson Tractor SIMMS SPE4A75S Fuel Pump Gasket Kits, comprising all necessary O-rings, Gaskets, Copper Washers, Seals, Caps etc.
All spares for CAV BPF1B Fuel Pumps, Elements, Delivery Valves, Control Rods, Control Sleeves, Joints etc.
Sets of Injectors for Massey Ferguson FE 20C Tractor CAV Type BKB50S622, Nozzle Type BDN4S1; set to 120 atms. Fully refurbished with new nozzles, back leak-off bolts and all necessary copper sealing washers. Supplied as Service Exchange or No Old Units.
Camshaft Oil Seals for CAV & SIMMS In-line Fuel Pums. Simms SPE "A", CAV BPE "B" (Part No: 7097-166). CAV "A" double Oil Seal (Part No: 7033-309). Perkins L4, IHC. CAV "A" Standard Oil Seal (Part No: 7033-295, replaces 7033-94).
Coil of useful Sealing Wire for Fuel Pumps and other sealing jobs. 3/8" diameter Lead Seals 5606-62.
Kit for the overhaul of the Bryce Type Aluminium Body Fuel pumps, FAOABO & AA Comprising Control Rod, Bellows & Bushes, Quadrant Sealing Washers, D-Valve Spring & Joint, Plunger Return Spring, Air Vent Screw. (Elements & D-Valve are also available at extra cost.)
Gasket Kit for the CAV In-line "N", "NN" type of Fuel Pump fitted with the LH & RH Hydraulic Governor. Comprises all necessary Gaskets, Joints and Washers.
Gasket Kit comprising all necessary O-rings, Gaskets, Copper Washers, Seals, Caps etc. Ford Dextra Tractor SIMMS SPE3A60S593 Fuel Pump BMC Nuffield Tractor SIMMS SPE3A75S473 Fuel Pump
Lister Injector Nozzles - CS & JP Engines: Nozzle Type: single Hole CAV BDL30S46, 0.3 dia. Hole, Spray Angle 30 degrees. For CS Engine: 6/1 8/1 12/2. Setting Pressure: 90 ats. Nozzle Type: single Hole CAV BDL30S54, 0.32 dia. Hole, Spray Angle 30 degrees. For JP Engine. Setting Pressure: 150 ats. All of the nozzles are supplied with a Copper Sealing Washer.
Yanmar Fuel Injection Pumps A non-genuine replacement service is now available Yanmar Part Number 714250-51710. L40 Engine. Yanmar Part Number 714350-51710. L60 Engine. Yanmar Part Number 714870-51740. L70 Engine. Yanmar Part Number 714970-51101. L100 Engine. These units are new. No old units are required. The Tappet is included with the unit. A reconditioning service is not available on these units.
Ferguson Tractor FE20C Fuel Pump Cam-box Drain Tap Hard to find Fuel Injection Pump Cam-box oil-drain tap. Brass Screwed 1/4 BSP Taper Thread. CAV Part No 7033-288.
Ferguson Tractor FE20C End-Cap Bushing Kit Usually with an engine surge on the FE20C it is the spindle worn on the Fuel Pump Governor End-Cap assembly (CAV Part No 7034-380A, now long obsolete). We have made up a kit to enable you to re-bush the aluminium housing. Comprising: 2 brass bushes, 1 spindle, 1 groverlock-pin and 1 key. Instructions are included with the kit. The End-cap is shown for illustration only - it is NOT included in the kit.
Thermostat Starting Aid The Thermostat Starting Aid is designed to enhance starting in all weather conditions and is standard equipment on many diesel engines. Perkins Engine Applications: Part No 2666103 CAV Part No 1854050. Screwed Terminal, 12 Volt. Perkins Engine Applications: Part No 2666108 CAV Part No 1854102. Spade Push-on Terminal, 12 Volt. We have Thermostarts, 24volt & 9 volt, for other engine applications in stock.
Sets of Injectors for Massey Ferguson Tractor 23C CAV Type: BKB40S697. Nozzle Type: BDN12SPC6290. Set to 135 ats. Des No 5354105 Fully refurbished, with new nozzle fitted and Copper Sealing Washer. Supplied as Service Exchange or No Old Units.
Injector Unit for Lister CS & JP Engines CAV Holder Type BKB50S507B. Nozzle BDL30S46. Set at 90 ats. For Engine Types: CS 6/1, 8/1. CAV Holder Type BKB50S507B. Nozzle BDL30S54. Set at 150 ats. For Engine Types: JP2/3/4/6. Fully refurbished, with new nozzle fitted and Copper Sealing Washer. Supplied as Service Exchange or No Old Units.
Lister SR Injector Unit Lister Part No: 201-50441, CAV/Bryce Identification No: 99/274 Body Part No: NSDLB086D0490 or BKBL86S5194B Body Sealing O-ring, Lister Part No: 201-11080 Nozzle, Lister Part No: 201-50461 Nozzle Seating Washer, Lister Part No: 201-11720 Nozzle, CAV/Bryce Part No: HL140S25C544 or BDLL140S6439 Set @ 2940psi, 200bar, 200atms.
Lister ST Injector Unit Lister Part No: 201-80265, CAV/Bryce Identification No: 99/355 & 99/430 Body Part No: NSDLB080D490 Body Sealing O-ring, Lister Part No: 201-11080 Original Nozzle, Lister Part No: 201-81391, Bryce Part No: HL134S25D656P2 Current Nozzle, Lister Part No: 201-81393, Bryce Part No: HL140S25D693P2 Nozzle Seating Washer, CAV Part No: 29004 Set @ 2940psi, 200bar, 200atms.
Diesel Fuel Filter for Lister/Petter Engines Threaded: 1/4 BSP Thread. Flow Right to Left Overall Ht: 4 inches. Lister/Petter No: P28439. Crosland No: 18489.
Injector Clamp for Perkins 4/108 Injector Fixing Clamp, Part No: 7008-841. Suitable for Perkins 4/108 injectors. Fitted on CAV Injector Type BKB40SD5224, 5352102 Perkins Engine Code "BG" Note: Ensure that the countersink on the flange is always upwards on the injector body when fitting.
Testing a Lister FR CAV Fuel Pump The 1956 Leslie Hartridge model UE/6 Fuel Pump Test Bench is still in use in our workshop for testing a range of the 'older types' of fuel pump. Seen here testing a CAV BPF Type Lister FR Fuel Pump. It is nice to see the original cam-box supplied with the test bench still providing a good service.
Re-Bushing FE 20C Fuel Pum Endcaps Showing the drilling prior to the re-bushing of Governor endcaps on the Vertical Milling Machine in our workshops Seen here testing a CAV BPF Type Lister FR Fuel Pump. We undertake the manufacture, modification and special build ups of obsolete Diesel Fuel Injection Fuel Pumps and Injectors
Please Note: In all cases, proprietary part numbers are quoted for reference purposes only, and are not intended to imply that the parts are manufactured by the conpanies indicated.